• New Design for Big high speed track , more rear down force then Lola05
• 2 Specification in 1.0mm Standard and 0.8mm light weight version.
• Body shell sell with side stiffener and sticker
• FEMCA Homologation in FEMCA #60406 , Ready for IFMAR Race.
• Pre Mark bodyshell tower hole .

• Desing for the ultimate racing machine and ultimate racers.
• Light weight (0.8mm) and Standard (1.0mm) avaliable , with 6 pcs side siffener to support inside of bodyshell.
• New desing front end , provide you more streeting. best on small track with tiny corner.
• Ultra low central of gravity and provide maxima downforace without reduce top end speed.
• FEMCA Approved in number FEMCA60405, IFMAR race ready.
• Pre-mark body post hole for most popular 1/8 racing car in market , make you easy to build bodyshell with correct position.
• Shipping Today.

• New design for MRX4 to avoid fornt upper arm touch bodyshell.
• Bodyshell hole mark for you to easy locate the position of bodyshell.
• Driver seat move forward to keep re fuel easy and quick .
• Rear side support with new sharp for better flow and support.
• With all new design can bring you best handling for any track.
• Strong and light as usual as BLITZ LOLA before.
• More down force in both fornt / rear , provide mixima traction.
• Item number #60403 EFRA 31491

Specification:
1.All new air-dynamic design of LOLA Can-AM Racing Car.
2.Fit on all 1/8 on-road gas power racing car.
3.Made by 1.0 mm lexan , strong and durable.
4.Include wing and 6 pcs side body supporter.
5.Provide high top-speed with stability.
FEMCA #60402 approval

Specification:
1.All new air-dynamic design of LOLA Can-AM Racing Car.
2.Fit on all 1/8 on-road gas power racing car.
3.Made by 1.0 mm lexan , strong and durable.
4.Include wing and 6 pcs side body supporter.
5.Provide quick turn-in /out speed and more traction.

#60401 FEMCA approval

• All New Design with Extra 40% surface of engine cooling
• Made with 0.8mm Material , ultra light and strong.
• Fits With Kyosho MP777 SP2 and Hong Nor X1-CR Racing Buggy.
• Item number #60503

 

• New aerodynamic stylish buggy body shelland give your engine extra space for  cooling.
• Thickness 1.0mm , highly durability.
• With Window mask and sticker.
• Design base on Mugen MBX-5 and Xray XB-8 .
• Prodcut number #60505
  　

BLITZ Buggy II #60502

• #60109 BLITZ Altis 2.3, heritance of Altis 2.0 Racing performance.
• Body shell width 201.5mm , quick response for corner and sweep turning.
• Smaller roof and cockpit , smaller drag effect during high speed.
• Made by 0.8mm material , Sell without painting.
• 2 Stage Window mask and Decal included.
• EFRA Homologated with EFRA 2027  , EFRA / IFMAR Race ready.

Specification: 1.  Product number #60108.BLITZ ALTIS 2.0 2.  Design for both High speed large circuit and small tight corner. 3.  Made by high density 0.8mm lexan, light and strong. 4.  Sell only Clear bodyshell Includes decal sheet and wing 5.  Bodyshell width 203mm which increase top end speed and reaction of hadling. 6.  EFRA 2020

1/10 200mm VDS Lola Racing Body shell
#60107N

Specification:

1.  Product number #60107N. (NEW TYPE 1/10 VDS LOLA)

2.  Front bubble room for front shock tower fit most moden 1/10 Touring

    car chassis .

3.  Made by high density 0.8mm PC light and strong.

4.  Includes decal sheet and wing and 4pcs side stiffener.
　

BLITZ MAZDA3  2.0 (200mm) #60106
BLITZ MAZDA3 1.9 (190mm) #60206

Specification:

1.  #60106 Fits all 200mm Nitro touring car,#60206 Fits all 190mm EP

     Touring car.

2.  Balance handling for High speed course with high corner speed.

3.  Made by high density 0.8mm lexan, light and strong.

4.  Includes decal sheet, window mask, and mounting hardware
5.  #60106 Come with 2 cut ling for adjust head down force .

Specification:

1.  Fit all 200mm Nitro touring car

2.  Excellent for High speed course with high corner speed.

3.  Made by high density 0.8mm lexan, light and strong.

4.  Includes decal sheet, window mask, and mounting hardware
5.  FEMCA #60010005 Approval

Specification:

1.  Fit all 200mm Nitro touring car

2.  Excellent for technical course and tight cornering

3.  Fit with IFMAR and EFRA technical specification

4.  Made by high density 0.8mm lexan, light and strong

5.  Includes decal sheet, window mask, and mounting hardware

SPECIFICATION:
1.Fit all 200mm Nitro touring car.
2.Good handling for high speed and corner.
3.Fit with IFMAR and EFRA technical specification
4.Made by high density 0.8mm lexan, light and strong.
5. Includes decal sheet, window mask, and mounting hardware.             

SPECIFICATION:
1.Fit with IFMAR and EFRA technical specification
2.Fit for 200mm Nitro touring car.
3.High down force for low traction track
4.Made by high density 0.8mm lexan, light and strong.
5. Includes decal sheet, window mask, and mounting hardware.        

• Following Stylish Altis 2.0 with smaller roof , shorter and all new front bumper.
• Made by 0.7mm material , more light and provide better handling.
• Body and wing specification following IFMAR Rule.
• Sell only Clear body with wing and sticker , windowmask .
• Width 195mm length 420mm.

Optional Wing

Original Wing

• Pre-Cut 2pcs wing set .
• Type I is special design for give 1/8th On-Road Racing Car ultra down force ,Type II can reduce the turbulence form engine INS-BOX and Heat sink Head.
• Made by 1.0mm Material , strong as other wing in market.
• Plastic Screw for fix wing not included.
• Type I is perfect for use in Our Lola05 body shell.
• Type II is Design base on Lola06 and many other body shell in market.
• User can adjust height of Type I wing to reduce down force
• Large surface to provide extra structure for body shell rear end.