Option
parts |
#53001 EXHAUST GAS COOLER

#53001 Gas Cooler Special design to add brass parts for give
better heat sink form back gas of pipe , thread lock nut of brass
parts can be open for clean inside of cooler without any tool, easy
to clean and maintain, deep cut aluminum level give best efficiency
to cooling down the gas back to fuel tank , it help driver to have
better run time for any 1/8 and 1/10 Engine power car.
¡@

#53001 Gas Cooler
Included 3pcs of Holder and black fuel tube clip, easy for you to
fix the cooler in your car without loose during racing, spare O-ring
X 1 also included for replacement.
Color : Silver #53001-S ,
Blue #53001-B

¡@ |
Option Parts for 1/8 On-Road Racing Car
Pinion Gear For
Motonica P8.0R / MRX- 4X
 |
|
¡@ Pinion Gear For
Motonica P8.0R / MRX-4X
Made by High Quality 7075-T6 Aluminum
with Hard Coating
Come with 1st in 16T / 17T and 2nd 20T/21T
Double lasting then original pinion.
#50116 1st 16T
#50117 1st 17T
#50120 2nd 20T
#50121 2nd 21T
¡@
|
 |
|
¡@ Pinion Gear For KYOSHO EVOLVA
NEW
Made by High Quality 7075-T6 Aluminum
with Hard Coating
Come with 1st in 16T / 17T and 2nd 20T/21T
Double lasting then original pinion.
#50216 1st 16T FOR KYOSHO EVOLVA 2007/M3
#50217 1st 17T FOR KYOSHO EVOLVA 2007/M3
#50220 2nd 20T FOR KYOSHO EVOLVA 2007/M3
#50221 2nd 21T FOR KYOSHO EVOLVA 2007/M3
¡@
|
#50326-1/8 On-Road Racing Pulley 26T
  |
#50326
Racing Pulley 26T
For 1/8 On-Road Racing Car
Design for use in 1/8th On-Road Racing
chassis, fits with Kyosho Evolva 05/M3,Mugen MRX-4X , Motonica-8.0R,
weight same with original plastic pulley, but provide 3 times up
durability , and with side dusty hole, you don't need to clean your
pulley after running.
SPECIFICATION:
S3M 26T Belt Pulley
Weight:8.5g
Aluminum 7075-T6 Hard Coating.
¡@
|
#50318 Racing Pulley 18T For 1/8 On-Road
Racing Car
  |
Racing Pulley 18T
For 1/8 On-Road Racing Car
Design for use in 1/8th On-Road Racing
chassis, fits with Kyosho Evolva 05/M3,Mugen MRX-4X , Motonica-8.0R,
weight same with original plastic pulley, but provide 3 times up
durability,and with side dusty hole, you don't need to clean your
pulley after running.
SPECIFICATION:
S3M 18T Belt Pulley
Weight:4.9g
Aluminum 7075-T6 Hard Coating.
¡@
|
#50316 Racing Pulley 16T For 1/8 On-Road
Racing Car
  |
Racing Pulley 16T
For 1/8 On-Road Racing Car
Design for use in 1/8th On-Road Racing
chassis, fits with Kyosho Evolva 05/M3,Mugen MRX-4X , Motonica-8.0R,
weight same with original plastic pulley, but provide 3 times up
durability, and with side dusty hole, you don't need to clean your
pulley after running.
SPECIFICATION:
S3M 16T Belt Pulley
Weight:5.0g
Aluminum 7075-T6 Hard Coating.
|
#50320
Racing Break Pulley 20T
For 1/8 On-Road Racing Car
  |
|
#50320
Racing Break Pulley 20T
For 1/8 On-Road Racing Car
Design for use in 1/8th On-Road Racing
chassis, fits with Kyosho Evolva 05/M3,Mugen MRX-4X, weight
light with original plastic pulley, but provide 3 times up
durability , and with side dusty hole, you don't need to clean your
pulley after running.
SPECIFICATION:
S3M 20T Belt Pulley
Weight:10g
Aluminum 7075-T6 Hard Coating.
¡@
¡@ |
|
 
KEVLAR RACING BELT
TiTAN KEVLAR RACING BELT
Provide best durability for most tough on-road racing , no more
break or strip during racing
with special design half-round tooth make power train more smooth
and low friction
Specification.
¡@
|
1/10 On-Road Gas Powered Car |
|
CODE |
BELT SPECIFICATION |
|
51186 |
Xray NT1 Front Kevlar Belt |
|
51396 |
Xray NT1 Middle Kevlar Belt |
|
51177 |
Xray NT1 Rear Kevlar Belt |
|
51189 |
MTX-4 Front Kevlar Belt |
|
51387 |
MTX-4 Middle Kevlar Belt |
|
51177 |
MTX-4 Rear Kevlar Belt |
|
51189 |
V1RRR Front Kevlar Belt |
|
51384 |
V1RRR Middle Kevlar Belt |
|
51180 |
V1RRR Rear Kevlar Belt |
|
1/10 On-Road Electronic Powered Car |
|
¡@ |
|
51186-3 |
XRAY T2008/009 Kevlar Front Belt
NEW |
|
51507 |
XRAY T2008/009 Kevlar Rear Belt
NEW |
|
1/8 On-Road Racing Car |
|
CODE |
BELT SPECIFICATION |
|
51201 |
Mugen MRX-4 Front Kevlar Belt |
|
51432 |
Mugen MRX-4 Middle Kevlar Belt |
|
51201-9 |
Mugen MRX-4 Rear Kevlar Belt |
|
51207 |
Kysoho M3 Front Kevlar Belt |
|
51420 |
Kysoho M3 Middle Kevlar Belt |
|
51201-9 |
Kysoho M3 Rear Kevlar Belt |
¡@ |
¡@
|