Titan Precision Model Co. Ltd.

1/10 190mm Electronic Power Racing Body-shell
# 60209 ISF (EFRA 4023)

ISF Designed for Rubber tire race in Asphalt and Carpet.
With 2 height line in 115mm for IFMAR Rule and 120mm For BRCA Rule.
Attached Wing with 2 cut line for adjust rear down force , we recommend the small wing for driver who need best performance and best lap time.
big size rear wing tower offer well support for rear wing.
Clear unpainted body-shell with light decal and window mask.
2 different weight and thickness in 0.8mm(#60209) and 0.7mm(#60209-07) .
IFMAR / EFRA Race approved with EFRA 4023 homologation number.

1/10 M-Chassis EP Racing Body-shell

#60901 BLITZ Mini RS4 Racing Sedan body-shell.
Fit Wheel Base 210mm Electronic Powered M Class Racing Chassis within width 168mm.
Pre-Mark Tower hole for ACTIVE HOBBY A210SS .which is perfect match of this racing body-shell in size and performance.
Made by 0.8mm Clear Polycarbonate.
Window Mask and high Quality Decal of light included.

200mm G/P Touring car racing body shell

#60111 BLITZ ISF 2.0 (200mm) EFRA2037

#60111 BLITZ ISF 2.0
We give more down force into ISF2.0 make it got well steering and stability, low profile hood
and roof bring less drag effect of body-shell.

Because most 1/10 touring car need to open front side window to make car easy to hang
during re-fuel and it also give engine more cooling.
Special design windscreen and roof shape will eliminate turbulence of open side window.

Adjustable rear wing give you easy to adjust rear down force with one coin
in few second , when track grip was changed you can easy to find your
best setup by change rear down force with our new design rear wing.

EFRA Homologated with EFRA 2037 , race approved for all EFRA and IFMAR race
　

Clear body shell with Decal and Window mask and plastic wing screw 60302-1 included.
Made from high quality 0.8mm and 0.7mm (light) polycarbonate with protect film for painting.
Fits most 1/10 On-Road Touring car Chassis with pre mark body tower hole.
Fast Adjustable rear wing.

#60112 BLITZ RS4 (200mm) EFRA2036

We had made most succeed full 1/10 Mini Racing bodsyehll for 1/10 Mini EP car in 2009 with Mini RS4

Now we build it into 1/10 200mm Touring Car with RS4

RS4 body shell designed very well balance characteristic.
Easy drive and well stability with good steering is our target of our RS4
RS4 give very well handling with most model 1/10 200mm chassis in "basic" setup.

You can also expect RS4 give you all new experience in same car with consist and
better lap time.

Big size adjustable wing had 2 cut line, original wing give more down force which
give car more stability but it also make car little under steering.
we recommend small wing for professional drivers.

Adjustable rear wing give you easy to adjust rear down force with one coin
in few second , when track grip was changed you can easy to find your
best setup by change rear down force with our new design rear wing.

EFRA Homologated with EFRA 2036 , race approved for all EFRA and IFMAR race
　

Clear body-shell with Decal and Window mask and plastic wing screw 60302-1 included.
Made from high quality 0.8mm and 0.7mm (light) polycarbonate with protect film for painting.
Fits most 1/10 On-Road Touring car Chassis with pre mark body tower hole.
Fast Adjustable rear wing.

#60110 VDS220 GPR RACING BODY-SHELL

#60110 VDS220 GPR Racing bodyshell
Design for 1/10 GPR Class with Front 30mm , Rear 40mm GPR Foam tire.
No Needs any extra parts can just fits with most modern 1/10 On-Road Chassis, easy way to try GPR Class with Only Tire and body-shell .
Made by 1.0mm Polycarbonate , best durability.
Width of body-shell Front 220mm , Rear 228mm, Maxima rear width of chassis in 230mm
Clear body-shell , Included decal , Side Support and Rear Wing / Screws.

#60109 ALTIS 2.3 1/10 WORLD CHAMPION BODY-SHELL

60109Semi-Painted Red.
#60109-SR
Altis 2.3 Semi-Painted Color:( F.Red/ Black / Silver /Smoke)

#60109-SY
Altis 2.3 Semi-Painted Color:(F.Yellow /Green / Silver / black smoke)

Specification

#60109 BLITZ Altis 2.3, heritance of Altis 2.0 Racing performance.
Body shell width 201.5mm , quick response for corner and sweep turning.
Smaller roof and cockpit , smaller drag effect during high speed.
Made by 0.8mm Polycarbonate , Sell in Clear body-shell without painting.
2 Stage Window mask and Decal included.
EFRA Homologated with EFRA 2027 , EFRA / IFMAR Race ready.
NEW Semi-Painted line #60109-SR , #60109-SY.

Specification:

1. Product number #60108.BLITZ ALTIS 2.0

2. Design for both High speed large circuit and small tight corner.

3. Made by high density 0.8mm lexan, light and strong.

4. Sell only Clear bodyshell Includes decal sheet and wing

5. Bodyshell width 203mm which increase top end speed and reaction of hadling.
6. EFRA 2020
　

1/10 200mm VDS Lola Racing Body shell
#60107N

Specification:

1. Product number #60107N. (NEW TYPE 1/10 VDS LOLA)

2. Front bubble room for front shock tower fit most moden 1/10 Touring

car chassis .

3. Made by high density 0.8mm PC light and strong.

4. Includes decal sheet and wing and 4pcs side stiffener.
　

BLITZ MAZDA3 2.0 (200mm) #60106
BLITZ MAZDA3 1.9 (190mm) #60206

Specification:

1. #60106 Fits all 200mm Nitro touring car,#60206 Fits all 190mm EP

Touring car.

2. Balance handling for High speed course with high corner speed.

3. Made by high density 0.8mm lexan, light and strong.

4. Includes decal sheet, window mask, and mounting hardware
5. #60106 Come with 2 cut ling for adjust head down force .

Specification:

1. Fit all 200mm Nitro touring car

2. Excellent for High speed course with high corner speed.

3. Made by high density 0.8mm lexan, light and strong.

4. Includes decal sheet, window mask, and mounting hardware
5. FEMCA #60010005 Approval

Specification:

1. Fit all 200mm Nitro touring car

2. Excellent for technical course and tight cornering

3. Fit with IFMAR and EFRA technical specification

4. Made by high density 0.8mm lexan, light and strong

5. Includes decal sheet, window mask, and mounting hardware

SPECIFICATION:
1.Fit all 200mm Nitro touring car.
2.Excellent for mid-large track, provide high speed cornering
3.Fit with IFMAR and EFRA technical specification
4.Made by high density 0.8mm lexan, light and strong.
5.Includes decal sheet, window mask, and mounting hardware
6.FEMCA #60010003 Approval.

SPECIFICATION:
1.Fit all 200mm Nitro touring car.
2.Good handling for high speed and corner.
3.Fit with IFMAR and EFRA technical specification
4.Made by high density 0.8mm lexan, light and strong.
5. Includes decal sheet, window mask, and mounting hardware.

SPECIFICATION:
1.Fit with IFMAR and EFRA technical specification
2.Fit for 200mm Nitro touring car.
3.High down force for low traction track
4.Made by high density 0.8mm lexan, light and strong.
5. Includes decal sheet, window mask, and mounting hardware.

190mm E/P Touring car racing body shell

SPECIFICATION:
1.Fit with IFMAR and EFRA technical specification.
2.Fit for 190mm electrical touring car.
3.For high-speed track with good handling.
4.Made by high density 0.8mm lexan, light and strong.
5. Includes decal sheet, window mask, and mounting hardware.
6.FEMCA #60020003 Approval

All TC body shell come with 3th wing stand, provide high-speed handling.

#60202 BLITZ ALFA 1.9 body shell

All Alfa body shell come with 3th wing stand ,provide high-speed handling

SPECIFICATION:
1.Fit with IFMAR and EFRA technical specification
2.Fit for 190mm electrical touring car.
3.For high-speed track with good handling.
4.Made by high density 0.8mm lexan, light and strong.
5.Includes decal sheet, window mask, and mounting hardware.
6.EFRA #60020002 Approval

BLTIZ ALTIS 1.9 # 60208 190mm E/P Racing Bodyshell


Following Stylish Altis 2.0 with smaller roof , shorter and all new front bumper. Made by 0.7mm material , more light and provide better handling. Body and wing specification following IFMAR Rule. Sell only Clear body with wing and sticker , window-mask . Width 195mm length 420mm.